Camera Gimbal G-v2
2 axis camera gimbal fully developed by the company, specifically for implementation with Ardupilot software (and hardware), using the MavLink telemetry link from both telemetry and gimbal control.
RGB and Thermal cameras can be installed in a single gimbal, with switching between cameras possibility. Either one of the cameras can be installed in a single gimbal.
- Description
Description
2 axis camera gimbal fully developed by the company, specifically for implementation with Ardupilot software (and hardware), using the MavLink telemetry link from both telemetry and gimbal control.
RGB and Thermal cameras can be installed in a single gimbal, with switching between cameras possibility. Either one of the cameras can be installed in a single gimbal.
Gimbal has a 360 deg. rotation around both axis (horizontal and vertical).
The casing of gimbal is manufactured from ABS plastic with carbon fibre reinforcement, which makes it extremely low weight.
| TECHNICAL SPECIFICATIONS | |
| Dimensions: | 0,15×0,08×0,08 m |
| Weight: | 0.4 kg |
| Motors: | 2 brushless direct drive |
| Rotation angle: | 360 deg both axis |
| Control: | UAVCan |
| Stabilization: | On both axis |
| Temperature range: | +40C -20C |
| Possible cameras: |
Both in a single gimbal or separately |
| Video transmission: | Analog or digital (via TCP/IP) |
| Control link: | 867 MHz, 1 W, AES 128 bit encoded |
| Video data transmission: | Analog/Digital 2.4/5.8 GHz |



