Camera Gimbal G-v2

2 axis camera gimbal fully developed by the company, specifically for implementation with Ardupilot software (and hardware), using the MavLink telemetry link from both telemetry and gimbal control.

RGB and Thermal cameras can be installed in a single gimbal, with switching between cameras possibility. Either one of the cameras can be installed in a single gimbal.

Category:

Description

2 axis camera gimbal fully developed by the company, specifically for implementation with Ardupilot software (and hardware), using the MavLink telemetry link from both telemetry and gimbal control.

RGB and Thermal cameras can be installed in a single gimbal, with switching between cameras possibility. Either one of the cameras can be installed in a single gimbal.

Gimbal has a 360 deg. rotation around both axis (horizontal and vertical).

The casing of gimbal is manufactured from ABS plastic with carbon fibre reinforcement, which makes it extremely low weight.

TECHNICAL SPECIFICATIONS
Dimensions: 0,15×0,08×0,08 m
Weight: 0.4 kg
Motors: 2 brushless direct drive
Rotation angle: 360 deg both axis
Control: UAVCan
Stabilization: On both axis
Temperature range: +40C -20C
Possible cameras:
  • RGB HD zoom camera with 10X zoom,
  • IR (thermal) camera 640×480 pix;

Both in a single gimbal or separately

Video transmission: Analog or digital (via TCP/IP)
Control link: 867 MHz, 1 W, AES 128 bit encoded
Video data transmission: Analog/Digital 2.4/5.8 GHz